Rocket Parachute Flare Manufacturers

Ningbo Zhenhua Life-Saving Equipment Co.,Ltd. and Ningbo Zhenhua Electrical Equipment Co.Ltd. are located in Xiangshan Harbor, East China Sea, Zhejiang Province(China life jacket)

1. The surface of the life jacket is mostly made of water-resistant and air-permeable materials. In addition to paying attention to the buoyancy parameters, the fisherman should also pay attention to whether there is any damage to the crotch interface and so on to prevent gravity-free floating after entering the water. 2. Generally, there is a pair of oval luminous bodies on the chest or shoulders of life jackets. They are mainly used for rescue at sea to find the target. Therefore, you should pay attention to whether to seam when choosing, and then consider its color and fabric.

When wearing gloves prevents operation, or other parts of the face are exposed to chemical substances and certain physical factors, such as paint, organic solvents, concentrated medicine, ultraviolet rays, etc., skin care creams are often used to protect the skin and prevent pollution . Cleaner should be dry cleaned to remove dust and poisonous pollution on skin and work clothes. Skin care creams should be applied before work, and detergents are generally used after work.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

The lifespan of an inflatable lifejacket is thus limited to ten years. Linked to this ten year period is the regular servicing of the device in periods of no more than two years and is strongly recommended for all lifejackets used in leisure boating.

Most falling water accidents are sudden, and water rescue is actually a race against time. In an emergency, when a person falls into the water or is trapped in a flood disaster, the prime time for water rescue is only a few minutes. Both the person falling into the water and the rescuer need to understand the correct use of the lifebuoy in order to rescue more quickly.