Inflatable Work Life Jacket (Pilot Suit) Manufacturers

When using a throw-and-drop life raft, the raft and the storage tank can be thrown directly into the water together. The life raft can be automatically inflated and formed for people in distress to ride. If the ship sinks too fast to throw it into the water, when the ship sinks to a certain depth, the hydrostatic pressure release device on the raft will automatically unhook, release the life raft, and the life raft will surface and automatically recharge. Bulging.

The marine lifebuoy light is a life-saving device equipped on a life jacket or a lifebuoy

The rope thrower is powered by high-pressure air and can be fired to the target quickly, safely and accurately with ropes or self-inflating lifebuoys or anchors.

Automatically inflatable life jackets are mainly composed of airbags, small high-pressure gas cylinders and automatic inflation valves, etc., suitable for use in marine and waterside work activities.

When wearing gloves prevents operation, or other parts of the face are exposed to chemical substances and certain physical factors, such as paint, organic solvents, concentrated medicine, ultraviolet rays, etc., skin care creams are often used to protect the skin and prevent pollution . Cleaner should be dry cleaned to remove dust and poisonous pollution on skin and work clothes. Skin care creams should be applied before work, and detergents are generally used after work.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.