Parachute signal rocket Manufacturers

On November 30, 2021, our company applied to the CCS Zhejiang Branch for the TPU tape -raid life raft type. The leaders of the CCS Zhejiang Branch attached great importance to the guidance of the assistance enterprise led by the CCS Zhejiang Branch.

Marine Lifejacket, (MarineChildLifejacket), suitable for life-saving use of all types of people on ocean coasts and inland rivers. The buoyancy of the lifejacket is greater than 113N after being immersed in the water for 24 hours, and the loss of buoyancy of the lifejacket should be less than 5%. Life jacket buoyancy material: polyethylene foam. The new marine life jacket is a new life jacket designed and manufactured in accordance with the requirements of IMOMSC207 (81) and MSC200 (80). The specification was implemented on July 1, 2010.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

Here is the steps to teach you how to wear a lift jecket.

The life vest should try to choose brighter colors such as red and yellow, because once the wearer falls into the water accidentally, it can be easier for rescuers to find.

Life jackets are divided into two types: inflatable life jackets and foam life jackets. The special life jackets on board are generally inflatable, red/orange for the crew and yellow for the passengers. Brightly colored life jackets can help people who are caught in the water to be found and rescued, while at the same time keeping warm and preventing heat loss from the body.