Inflatable Swim Rings Manufacturers

The maritime department organizes relevant business departments every year to inspect the ship’s smoke signal flares. In addition, general ocean navigation ships must be equipped with 6 hand-held pyrotechnic sticks, 4 orange smoke flares, and 12 parachute flares. So, what is a smoke signal?

Rocket Parachute Flare Signal is a distress signal that can be hung under a parachute and continue to burn for a certain period of time after it is launched into the air to a certain height, and emits a red light with a certain luminous intensity and descends at a slow speed.

The weight of Inflatable Waistband is no more than 0.6kg. This light weight makes the inflatable belt cause almost no additional load pressure to the user during daily carrying. Whether it is for leisure activities such as boating and swimming or for daily outings, it can be easily worn around the waist without causing any burden, greatly enhancing the convenience of carrying.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

Basic knowledge of life jackets We recommend that consumers must recognize that life jackets are very special products, and they are used in times of crisis, so be careful when choosing.

Wearing a life jacket can provide a stable buoyancy for those who fall into the water, and can make the mouth and nose of the unconscious person out of the water.