Flat Container Manufacturers

Experts believe that the premature death of people in distress at sea is not caused by hunger and thirst, but mainly by fear. Therefore, an important factor for survival at sea is a strong will not afraid of difficulties and a firm belief in survival. Therefore, we must first overcome despair and fear, and secondly be able to withstand the test of hunger, cold, thirst, and sea sickness. When you are in distress at sea, if you are not afraid of danger, busy and not chaotic, and you are fully prepared in advance, you can increase your hope of rescue.

ZHENHUA specializes in the manufacture of self-inflating jackets for hand-held (hand), designed and manufactured in accordance with Europee jacket is inflated, use the protruding part of the cap to press the valve to test. The valve should be easily pressed. When it is released, it should be restored to the closed position and sealed again.
3. Appearance inspection of the outer cover and the webbing - check the outer cover cloth, seams, webbing connections, buckles, etc.; the fading of the cloth indicates that the strength is weakened, and the strength is checked by tightening the joint and the connecting portion. If the lifejacket has any damage, it needs to be replaced, and the test should be carried out before going out.
Fourth, storage
Store in a clean, cool, dry place.
Do not place soluble parts in an environment where humidity and temperature are too high for too long.
Dissolved parts of vented packaging cannot be stored in sealed containers when transported.
The storage time of soluble parts should not exceed 18 months before use.
How to test your life jacket
1. Put on a life jacket (exhaust state) into the shallow water area (water depth should be enough to keep your head above the water).
2. The automatic inflator will act and then inflate.
3. Tilt your head backwards to see if the air-filled life jacket can lift you up (the back is slightly tilted back) in a relaxed state of floating to see if your mouth is just above the water.
4. Repeat these steps, the life jacket is blown inflated, and the life jacket is partially inflated so that you can be adequately supported to complete the inflation. Note: Auto-inflatable life jackets are not recommended for those who are weak or not swimming.
5. Remove, vent, cool and reinstall according to the manufacturer's instructions.

The inflatable liferaft after inflation molding is generally composed of upper and lower floating tires, bolsters, tents, bilge and other components.

Basic knowledge of life jackets We recommend that consumers must recognize that life jackets are very special products, and they are used in times of crisis, so be careful when choosing.

Automatically inflatable life jackets are mainly composed of airbags, small high-pressure gas cylinders and automatic inflation valves, etc., suitable for use in marine and waterside work activities.

A collision with a cruise ship in the Moabi area of the Mississippi River, California, caused four people to be missing and many others were injured.